Several major tap production equipment

    Taps before and after the production of about 20 more than the process, the main material roughing, heat treatment, and finishing three parts. Each process needs to be equipped with the appropriate equipment, especially the finishing of the tap production equipment is in addition to the material outside the tap quality of the most important objective factors.

    For the finishing of the tap production equipment are grinding machines, not only because of the grinding of high precision machining, the main reason is that after the heat treatment tool steel hardness is high, can only use grinding machine processing. These tap production equipment is mainly tapered square tail grinding, taps cylindrical grinding, tap groove grinding, and taper thread grinding and so on.

    The end of the taper is used to process the tails of the tap. Taps of the tail is the positioning of the tap, the domestic taps of the square tail for the four symmetrical, equal length. The taper of the inlet taps is still symmetrical on both sides, but the length is three short and long, allowing for better positioning.

   Taper The outer cylinder is used to process the handle of the tap and the outer circumference of the blade. To ensure that the tap part of the concentricity.

    The trench is used to process the taps of the tap. Can be processed from the light billet, can also be processed from the prefabricated slot. The groove of the tap is the part of the tap and the trim and the trim, and the racquet's rake angle is also achieved by the groove.

    Taper thread grinding is also referred to as tap mill, used to process the thread of the tap. The accuracy of the tap thread determines the accuracy of the final hole machining, so the taper grinder is a very core device.

   In addition, the taper grinding machine, taper shovel machine is also used for finishing the tap production equipment.